Seat Belt Retractor, Rear

Seat belt retractor, rear

Removal

Note! Removal steps in this procedure may contain installation details.

See information regarding the handling of non-deployed pyrotechnical parts Refer to: Handling non-deployed pyrotechnical part Handling Non-Deployed Pyrotechnical Part

Battery, disconnection

Remove the following items:
- Side panel load space Refer to: Side panel load space Side Panel Load Space
- Seat cushion, rear seat Refer to: Seat cushion, rear seat Seat Cushion, Rear Seat
- side pad Refer to: Side pad Side Pad

Perform connector ignition cable Refer to: Igniter wire connector Igniter Wire Connector








Torque: Safety belt retractor rear to body, 40 Nm




Torque: Safety belt retractor rear to body, 40 Nm

Installation

To install, reverse the removal procedure.

Perform seatbelt function, check Refer to: Seat belt function, check Testing and Inspection

Perform supplemental restraint system (SRS), post check Refer to: Supplementary restraint system (SRS), inspection Testing and Inspection