Diesel Data

Diagnostics Equipment and Information
Diesel Data

Diagnostics Equipment and Information
Wishlist

Category

Cable Bundle Cat III Interface, Vocom 2 Interface
Cable Bundle Cat III Interface, Vocom 2 Interface - Image 2

Cable Bundle Cat III Interface, Vocom 2 Interface

$2,675.00

-

Cable Bundle — CAT III Interface, Vocom 2 Interface

A rugged, shop-grade cable kit purpose-built for the Vocom 2 diagnostic interface. This bundle covers the most common heavy-duty and medium-duty vehicle connectors so you can move from basic health checks to parameter work and after-treatment diagnostics with a single, reliable set of leads.

Highlights

  • Vocom 2-ready: Pin-accurate wiring and reinforced strain relief for stable comms with your Vocom 2 interface.

  • Broad vehicle coverage: Access J1939/J1708 networks and OBD-II platforms found across modern Volvo-group trucks and many mixed fleets.

  • Shop-tough build: Oil- and abrasion-resistant jacket, molded boots, and gold-plated contacts for repeat connect/disconnect cycles.

  • Signal integrity first: Twisted-pair construction and full shielding to minimize CAN and K-Line noise on long runs.

  • Labelled & keyed: Each lead is clearly printed and mechanically keyed to prevent mis-mating in tight bays.

What’s in the Box

  • OBD-II 16-pin (J1962) to Vocom 2 lead — for light/medium duty and late-model platforms

  • Deutsch 9-pin (Type II/Green) to Vocom 2 lead — primary J1939 access on most heavy-duty trucks

  • Deutsch 6-pin to Vocom 2 lead — legacy J1708/J1587 networks

  • Volvo-style multi-pin service lead — for supported pre-OBD or specialty connectors

  • Hook-and-loop cable wraps — route and secure your setup in the bay

Don’t need the legacy leads? Ask about the “Core” 2-lead variant.

Technical Specs

  • Connector standard: J1962 16-pin, Deutsch 9-pin (Type II), Deutsch 6-pin, Volvo-style multi-pin

  • Electrical: 24V tolerant, shielded twisted pairs for CAN High/Low; K-Line/L-Line supported where applicable

  • Lengths: 1.5 m (±5%) per lead (bundle average)

  • Jackets: TPU, oil/grease resistant; operating temp −20°C to +70°C

  • Contact plating: ≥30 µin Au over Ni (signal), Sn/Ni (ground)

  • Strain relief: Over-molded boots, 10,000+ bend-cycle rated

Compatibility

  • Hardware: Vocom 2 / Vocom II interface (not included)

  • Networks: CAN (J1939), legacy J1708/J1587, and OBD-II (J1962) as supported by the vehicle

  • Software: Works with OEM diagnostic applications that support Vocom 2 (licenses not included)

Notes & Compliance

  • This bundle is cabling only; Vocom 2 interface and software licenses are sold separately.

  • Always follow OEM service procedures and battery support recommendations during programming sessions.

  • RoHS compliant; CE marked. Warranty: 12-month limited against defects in materials and workmanship.

Category:

Related products

💬