Data List / Active Test [12/2019 - 11/2023]
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Body Electrical / Main Body, Master Switch or Back Door* / Data List.
- *: w/ Power Back Door System
- Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note ACC SW Ignition switch ACC signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ACC- IG SW Ignition switch ON signal OFF or ON OFF: Ignition switch off or ACC
ON: Ignition switch ON- RR Door Courtesy SW Rear door courtesy light switch (for RH) signal OFF or ON OFF: Rear door RH closed
ON: Rear door RH open- RL Door Courtesy SW Rear door courtesy light switch (for LH) signal OFF or ON OFF: Rear door LH closed
ON: Rear door LH open- Back Door Courtesy SW Back door courtesy switch signal OFF or ON OFF: Back door closed
ON: Back door open- Back Door Open Back door lock signal Prohibit or Permit Prohibit: Back door locked
Permit: Back door unlocked- Door Lock SW-Lock Door control switch assembly lock signal OFF or ON OFF: Lock switch of door control switch assembly not pushed
ON: Lock switch of door control switch assembly pushed- Door Lock SW-Unlock Door control switch assembly unlock signal OFF or ON OFF: Unlock switch of door control switch assembly not pushed
ON: Unlock switch of door control switch assembly pushed- Door Key SW-Lock Driver door key-linked lock / unlock switch lock signal OFF or ON OFF: Driver door key cylinder not turned to lock position
ON: Driver door key cylinder turned to lock position- D Door Key SW-UL Driver door key-linked lock / unlock switch unlock signal OFF or ON OFF: Driver door key cylinder not turned to unlock position
ON: Driver door key cylinder turned to unlock position- FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK LOCK: Front door RH locked
UNLOCK: Front door RH unlocked- FR Door Courtesy SW Front door courtesy light switch (for RH) signal OFF or ON OFF: Front door RH closed
ON: Front door RH open- FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK LOCK: Front door LH locked
UNLOCK: Front door LH unlocked- FL Door Courtesy SW Front door courtesy light switch (for LH) signal OFF or ON OFF: Front door LH closed
ON: Front door LH open- RR-Door Lock Pos SW Rear door RH unlock detection switch signal OFF or ON OFF: Rear door RH locked
ON: Rear door RH unlocked- RL-Door Lock Pos SW Rear door LH unlock detection switch signal OFF or ON OFF: Rear door LH locked
ON: Rear door LH unlocked- Unlock Key Twice Key-linked 2-step unlock function OFF or ON Customize setting displayed - Automatic Door Lock Function Automatic door lock function OFF, Link Shift or Link Speed Customize setting displayed - Automatic Door Unlock Function Automatic door unlock function OFF, Link D-door or Link Shift Customize setting displayed - The Number of DTC Number of trouble codes 0 to 255 Number of stored DTCs displayed - Body Electrical > Master Switch > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Door Lock Switch Status Multiplex network master switch assembly lock signal OFF or ON OFF: Lock switch of multiplex network master switch assembly not pushed
ON: Lock switch of multiplex network master switch assembly pushed- Door Unlock Switch Status Multiplex network master switch assembly unlock signal OFF or ON OFF: Unlock switch of multiplex network master switch assembly not pushed
ON: Unlock switch of multiplex network master switch assembly pushed- Body Electrical > Back Door > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Courtesy SW Back door courtesy switch signal* OFF or ON OFF: Back door closed
ON: Back door open- - *: w/ Power Back Door System
- ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Body Electrical / Main Body / Active Test.
- Perform the Active Test according to the display on the GTS.
Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Door Lock Door lock motor OFF/Unlock/Lock - D-Door Unlock Driver door lock motor OFF/ON - Trunk and Back-Door Open Back door lock motor* OFF/ON - Shock Detection Unlock Operate door lock motor UNLOCK/LOCK - - *: w/o Power Back Door System