Entry Exterior Alarm and Answer-back Buzzer do not Sound [11/2023 - ]: Procedure

1. Read the customize setting according to the display on the GTS.

   Wireless Door Lock 

   Tester Display	Description	Default	Setting	ECU
   Wireless Buzzer Response Function	Wireless buzzer response	Enable	$00:Disable, $01:Enable	Main body ECU (multiplex network body ECU)

   Result

   Result	Proceed to
   "Enable" is displayed	A
   "Disable" is displayed	B

Result: 

B 

PERFORM CUSTOMIZE SETTING. Refer to  CUSTOMIZE PARAMETERS [11/2023 - ] 

Result: 

A 

See step  2

1. Check that the function operates normally.

   Refer to OPERATION CHECK [11/2023 - ]

   Result

   Result	Proceed to
   Wireless door lock function operates normally	A
   Wireless door lock function does not operate normally	B

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [11/2023 - ] 

Result: 

A 

See step  3

1. Read the Data List according to the display on the GTS.

   Body Electrical > Main Body > Data List 

   Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
   FR Door Lock Position Switch Status	Front door RH unlock detection switch signal	Unlock or Lock	Unlock: Front door RH unlocked Lock: Front door RH locked	-
   FL Door Lock Position Switch Status	Front door LH unlock detection switch signal	Unlock or Lock	Unlock: Front door LH unlocked Lock: Front door LH locked	-
   RR Door Lock Position Switch Status	Rear door RH unlock detection switch signal	Unlock or Lock	Unlock: Rear door RH locked Lock: Rear door RH unlocked	-
   RL Door Lock Position Switch Status	Rear door LH unlock detection switch signal	Unlock or Lock	Unlock: Rear door LH locked Lock: Rear door LH unlocked	-

   Body Electrical > Main Body > Data List 

   Tester Display
   FR Door Lock Position Switch Status
   FL Door Lock Position Switch Status
   RR Door Lock Position Switch Status
   RL Door Lock Position Switch Status

   OK

   The GTS display changes correctly in response to the lock/unlock operation.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO LIGHTING SYSTEM (Proceed to Door Unlock Detection Switch Circuit). Refer to  Door Unlock Detection Switch Circuit [11/2023 - ] 

Result: 

OK 

See step  4

1. Perform Active Test according to the display on the GTS.

   Body Electrical > Main Body > Active Test 

   Tester Display	Measurement Item	Control Range	Diagnostic Note
   Wireless Buzzer	Wireless buzzer	OFF/ON	-

   Body Electrical > Main Body > Active Test 

   Tester Display
   Wireless Buzzer

   Result

   Result	Proceed to
   Wireless buzzer does not sound	A
   Wireless buzzer sounds	B

Result: 

A 

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (NO ANSWER-BACK). Refer to  No Answer-Back [11/2023 - ] 

Result: 

B 

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to  REMOVAL [11/2023 - ]