Precaution [11/2023 - ]
- CAUTION REGARDING INTERFERENCE WITH ELECTRONIC DEVICES WARNING:
As weak radio waves are emitted from the electrical key transmitter sub-assembly, if a pacemaker is being used, be sure to read the pacemaker instruction Service Information and the following.
- People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should keep away from the smart key system antennas. The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your dealer for details, such as the frequency of radio waves and timing of the emitted radio waves. Then, consult your doctor to see if you should disable the entry function.
Refer to PARTS LOCATION [11/2023 - ]
- User of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.
- Ask your dealer for details for disabling the smart key system.
Exterior antenna - Front door outside handle assembly (for Driver Door)
- Front door outside handle assembly (for Front Passenger Door)
- Electrical key antenna (outside luggage compartment)
Interior antenna - No. 1 indoor electrical key antenna assembly (front floor)
- No. 2 indoor electrical key antenna assembly (rear floor)
- No. 3 indoor electrical key antenna assembly (inside luggage compartment)
HINT:
The smart key system can be disabled by a customize setting.
Refer to CUSTOMIZE PARAMETERS [11/2023 - ]
- People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should keep away from the smart key system antennas. The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your dealer for details, such as the frequency of radio waves and timing of the emitted radio waves. Then, consult your doctor to see if you should disable the entry function.
- PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL NOTE:
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
- PRECAUTION WHEN USING GTS
- When using the GTS with the ignition switch off, perform lock and unlock operations using the door control switch of the multiplex network master switch assembly at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins, and then select the vehicle model manually.
Then select Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Smart Key. While using the GTS, periodically perform lock and unlock operations using the door control switch of the multiplex network master switch assembly at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.
- When using the GTS with the ignition switch off, perform lock and unlock operations using the door control switch of the multiplex network master switch assembly at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins, and then select the vehicle model manually.
- PRECAUTIONS FOR AUXILIARY BATTERY
- After the auxiliary battery is removed and reinstalled, be sure to wait at least 10 seconds before the next engine start. The engine may not start immediately after the auxiliary battery is reinstalled.
HINT:
- After disconnecting and reconnecting a cable to the auxiliary battery, the engine may not start on the first attempt. If this occurs, turn the ignition switch off. The engine will start normally from the second time onward.
- When a cable to the auxiliary battery is disconnected and reconnected, the power source mode returns to the mode it was in before the cable was disconnected.
- After the auxiliary battery is removed and reinstalled, be sure to wait at least 10 seconds before the next engine start. The engine may not start immediately after the auxiliary battery is reinstalled.
- PRECAUTION FOR REGISTRATION
- If replacing any of the following parts, refer to Registration.
Refer to REGISTRATION [11/2023 - ]
- Certification ECU (smart key ECU assembly)
- ECM
- Electrical key transmitter sub-assembly
- ID code box (immobiliser code ECU)
- Main body ECU (multiplex network body ECU)
- DCM (telematics transceiver)*
- *: for Remote Connect Compatible Type
- If replacing any of the following parts, refer to Registration.