DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System - Service Information >> ELECTRICAL KEY OSCILLATOR (for Front Floor) >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY 
    1. Connect the connector.
      NOTE:

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.
  2. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY 

    for UA80E:

    Refer to INSTALLATION [12/2019 - 10/2022]

    for UA80F:

    Refer to INSTALLATION [12/2019 - 10/2022]

    for P810:

    Refer to INSTALLATION [12/2019 - ]

Diesel-Data.com