DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System - Service Information >> Security Indicator Light Assembly >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT SECURITY INDICATOR LIGHT (TELLTALE LIGHT ASSEMBLY) 
    1. Illumination Inspection
      1. Apply auxiliary battery voltage to the security indicator light (telltale light assembly) and check that the light illuminates.
        GTY932146Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Security Indicator Light (Telltale Light Assembly))

        OK

        Measurement Condition Specified Condition
        Auxiliary battery positive (+) → 3 (LP)
        Auxiliary battery negative (-) → 4 (E)        		 Security indicator light illuminates

        If the result is not as specified, replace the security indicator light (telltale light assembly).

Diesel-Data.com