DTC B1350-13: Acoustic Vehicle Alerting Speaker Circuit Open; DTC B1350-19: Acoustic Vehicle Alerting Speaker Circuit Current Above Threshold [11/2023 - ]: Procedure
- INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY
Refer to INSPECTION [10/2022 - ]
Result
Proceed to OK NG Result:
NG
REPLACE VEHICLE APPROACHING SPEAKER ASSEMBLY. Refer to REMOVAL [10/2022 - ]
Result:
OK
See step 2
- CHECK HARNESS AND CONNECTOR (VEHICLE APPROACHING SPEAKER ASSEMBLY - VEHICLE APPROACHING SPEAKER CONTROLLER)
- Disconnect the A50 vehicle approaching speaker controller connector.
- Disconnect the A12 vehicle approaching speaker assembly connector.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition A12-2 - A50-7 (SP+) Always Below 1 Ω A12-1 - A50-8 (SP-) Always Below 1 Ω A12-2 or A50-7 (SP+) - Body ground Always 10 kΩ or higher A12-1 or A50-8 (SP-) - Body ground Always 10 kΩ or higher Result
Proceed to OK NG
Result:
OK
REPLACE VEHICLE APPROACHING SPEAKER CONTROLLER. Refer to REMOVAL [11/2023 - ]
Result:
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR