DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Monitor System - Diagnostics - Introduction >> Blind Spot Monitor System >> Terminals Of Ecu [11/2023 - ] >> Terminals Of Ecu [11/2023 - ]

Terminals Of Ecu [11/2023 - ]

  1. BLIND SPOT MONITOR SENSOR LH (B) 
    Fig 1: Blind Spot Monitor Sensor LH (B) [11/2023 - ]
    GTY1179309Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Terminal No.
    (Symbol)    		 Terminal Description Condition Specified Condition
    M43-4 (OMIL) - M43-10 (BLGD) Outer rear view mirror indicator LH power source Outer rear view mirror indicator LH illuminated 3.5 to 9.5 V
    Outer rear view mirror indicator LH blinking Alternating between 0 to 9.5 V
    Outer rear view mirror indicator LH not illuminated Below 1 V
    M43-5 (BLB) - M43-10 (BLGD) IG power source Ignition Switch off Below 1 V
    Ignition switch ON 11 to 14 V
    M43-10 (BLGD) - Body Ground Ground Always Below 1 V
  2. BLIND SPOT MONITOR SENSOR RH (A) 
    Fig 2: Blind Spot Monitor Sensor RH (A) [11/2023 - ]
    GTY1180002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Terminal No.
    (Symbol)    		 Terminal Description Condition Specified Condition
    M2-3 (BUZ) - M2-10 (BRGD)* RCTA buzzer (blind spot monitor buzzer) operation signal RCTA buzzer (blind spot monitor buzzer) not sounding 11 to 14 V
    RCTA buzzer (blind spot monitor buzzer) sounding Alternating between 0 to 14 V
    M2-4 (OMIR) - M2-10 (BRGD) Outer rear view mirror indicator RH power source Outer rear view mirror indicator RH illuminated 3.5 to 9.5 V
    Outer rear view mirror indicator RH blinking Alternating between 0 to 9.5 V
    Outer rear view mirror indicator RH not illuminated Below 1 V
    M2-5 (BRB) - M2-10 (BRGD) IG power source Ignition Switch off Below 1 V
    Ignition switch ON 11 to 14 V
    M2-10 (BRGD) - Body Ground Ground Always Below 1 V

    *: w/o Intuitive Parking Assist System

Diesel-Data.com