Caution / Notice / Hint

NOTE:

Make sure to read "Before Starting Driving Adjustment" before proceeding with work.
Refer to BEFORE STARTING DRIVING ADJUSTMENT [09/2020 - ]
Make sure to perform the transition to online axis alignment mode with the vehicle stopped.
Transitioning to online axis alignment mode will erase the learning value, so make sure to complete the adjustment.
Turning the ignition switch off while in online axis alignment mode will cause the system to exit online axis alignment mode, so to continue with the adjustment, it is necessary to transition to online axis alignment mode again.
All of the driving support system functions will be inoperative while the adjustment is in progress.
When driving the vehicle with the GTS connected, be careful with how the wires are routed.
If the adjustment does not complete within a total cumulative time of 15 minutes when the vehicle is driven with all conditions met, perform the adjustment on another route.
If the adjustment does not complete within a total cumulative time of 30 minutes when the vehicle is driven with all conditions met, perform the adjustment using target recognition.
After adjustment is complete, to start the various systems it is necessary to turn the ignition switch off and then to ON again.
In situations such as when the online axis alignment terminates abnormally, to perform online axis alignment again, turn the ignition switch off and then back to ON and enter online axis alignment mode again.
For vehicles with height adjustment function, perform the adjustment at the standard vehicle height.