Caution / Notice / Hint
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)
| Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
| Millimeter wave radar sensor assembly | Adjust millimeter wave radar sensor assembly |
|
Target Adjustment (Triangle Target): Refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [09/2020 - 10/2022] , or refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [10/2022 - ] or Target Adjustment (Flat Surface Target): Refer to TARGET ADJUSTMENT (FLAT SURFACE TARGET) [09/2020 - 10/2022] , or refer to TARGET ADJUSTMENT (FLAT SURFACE TARGET) [10/2022 - ] or Driving Adjustment: Refer to DRIVING ADJUSTMENT [09/2020 - 10/2022] , or refer to DRIVING ADJUSTMENT [10/2022 - ] |
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)
| Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
| Millimeter wave radar sensor assembly | Adjust millimeter wave radar sensor assembly |
|
Target Adjustment (Triangle Target): Refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [09/2020 - 10/2022] , or refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [10/2022 - ] or Target Adjustment (Flat Surface Target): Refer to TARGET ADJUSTMENT (FLAT SURFACE TARGET) [09/2020 - 10/2022] , or refer to TARGET ADJUSTMENT (FLAT SURFACE TARGET) [10/2022 - ] or Driving Adjustment: Refer to DRIVING ADJUSTMENT [09/2020 - 10/2022] , or refer to DRIVING ADJUSTMENT [10/2022 - ] |