Installation [09/2020 - ]: Procedure
- INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY NOTE:
If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.
- INSTALL COOL AIR INTAKE DUCT SEAL
for except Sport Package: Refer to PROCEDURE - Step 4
for Sport Package: Refer to PROCEDURE - Step 4
- ADJUST MILLIMETER WAVE RADAR SENSOR
- When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
HINT:
Millimeter wave radar sensor assembly learning can be performed by using either Target Adjustment (Triangle Target) or Target Adjustment (Flat Surface Target) or Driving Adjustment.
Target Adjustment (Triangle Target): Refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [09/2020 - 10/2022] , or refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [10/2022 - ]
Target Adjustment (Flat Surface Target): Refer to TARGET ADJUSTMENT (FLAT SURFACE TARGET) [09/2020 - 10/2022] , or refer to TARGET ADJUSTMENT (FLAT SURFACE TARGET) [10/2022 - ]
Driving Adjustment: Refer to DRIVING ADJUSTMENT [09/2020 - 10/2022] , or refer to DRIVING ADJUSTMENT [10/2022 - ]
- When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
