Utility [12/2019 - 09/2020]

HINT: 

Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.

1. Perform Recognition Camera/Target Position Memory according to the display on the GTS.

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Recognition Camera/Target Position Memory

   HINT: 

   For forward recognition camera adjustment procedures.

   Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

   One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [12/2019 - 09/2020]

   Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [12/2019 - 09/2020]

HINT: 

Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.

1. Perform Recognition Camera Axis Adjust according to the display on the GTS.

   For Type A:

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Recognition Camera Axis Adjust

   For Type B:

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Recognition Camera Axis Adjust

   HINT: 

   For forward recognition camera adjustment procedures.

   Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

   One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [12/2019 - 09/2020]

   Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [12/2019 - 09/2020]

HINT: 

PCS Image Information Clear is used to clear the PCS Image Information data.

1. Connect the GTS to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the GTS on.
4. Enter the following menus: Chassis / front recognition camera / Utility / PCS Image Information Clear.
5. Perform PCS Image Information Clear according to the display on the GTS.

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   PCS Image Information Clear

HINT: 

PCS Image Record Setting is used to activate/deactivate the PCS image recording function.

1. Connect the GTS to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the GTS on.
4. Enter the following menus: Chassis / front recognition camera / Utility / PCS Image Record Setting.
5. Perform PCS Image Record Setting according to the display on the GTS.

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   PCS Image Record Setting