Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
U0074 (CASE 1)
| One of the following conditions is met | - |
| CAN transmission stop instructions | On |
| Difference between CAN frame transmission time and CAN frame reception time | 0.003 seconds or more |
| YGS0 (CAN data) | On |
U0074 (CASE 2)
| One of the following conditions is met | - |
| CAN transmission stop instructions | On |
| Difference between CAN frame transmission time and CAN frame reception time | 0.003 seconds or more |
| STS0 (CAN data) | On |
U0100
| Communication status with ECM (C-Bus) | Invalid |
U0110
| Communication status with inverter with converter assembly | Invalid |
U111A
| Communication status with ECM (P-Bus) | Invalid |
U0125
| Communication status with yaw rate sensor | Invalid |
U025E
| Communication status with No. 1 skid control ECU (brake booster with master cylinder assembly) | Invalid |
U0293
| Communication status with hybrid vehicle control ECU (C-Bus) | Invalid |
U1107
| Communication status with certification ECU (smart key ECU assembly) | Invalid |
U1150
| Communication status with hybrid vehicle control ECU (P-Bus) | Invalid |