DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 127 (Electronically Controlled Brake System (HV) - Diagnostic Codes (11 Of 11), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> Brake Hold Standby Indicator Light Circuit [12/2019 - 10/2022] >> Description

Brake Hold Standby Indicator Light Circuit [12/2019 - 10/2022]: Description

WARNING: This page is about a different variant/trim than selected.

The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (electric parking brake switch assembly) is pressed while the ignition switch is turned to ON.

  1. Conditions required for operation standby:
    1. The driver door is closed.
    2. The driver seat belt is fastened.
    3. The system is normal.
Diesel-Data.com