DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System (Except 12.3 Inch Display) - Diagnostics - Introduction (3 Of 4) >> METER / GAUGE SYSTEM (except 12.3 Inch Display) >> Customize Parameters [09/2020 - 10/2022] >> Customize Parameters [09/2020 - 10/2022]

Customize Parameters [09/2020 - 10/2022]

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the GTS
      1. Connect the GTS to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the GTS on.
      4. Enter the following menus: Customize Setting / Warning or Display.
      5. Select the setting by referring to the table below.

        Warning 

        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjust Function to change the turn signal flasher buzzer sound volume Medium $02:Large, $00:Medium, $01:Small Combination meter assembly
        Suggestion Service Function Function to change the suggestion function display setting ON 00:OFF, 01:Only Parked, 11:ON Main body ECU (Multiplex network body ECU)

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the trip result display time after the ignition switch is turned off 30s $00:30s, $01:60s, $02:600s, $03:OFF Combination meter assembly
    2. Customizing with the multi-display
      1. Turn the ignition switch to ON.
      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Suggestion Function.
      3. Select the setting by referring to the table below.
        Display Default Content Setting Relevant ECU
        Suggestion Function On Function to change the suggestion function display setting On, On (when the vehicle is stopped), Off Main body ECU (Multiplex network body ECU)
    3. Customizing with the multi-information display
      1. Turn the ignition switch to ON.
      2. Select the settings tab on the multi-information display.
      3. Select the setting by referring to the table below.
        NOTE:

        As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        "CLOCK SETTING"

        Display Description Setting ECU
        - Set minutes to 00 - Combination meter assembly
        "Detail Settings" 12H/24H setting and clock adjustment -
        LTA

        Display Description Setting ECU
        "Lane Center" Lane centering function setting ON/OFF Forward recognition camera
        "Steering Assist" Steering assist function setting ON/OFF
        "Sensitivity" Lane departure alert timing level setting 2 levels
        "Sway Warning" Vehicle sway warning function setting ON/OFF
        "Sway Sensitivity" Sway warning sensitivity level setting 3 levels
        PCS

        Display Description Setting ECU
        - Pre-collision system setting ON/OFF Forward recognition camera
        "Sensitivity" Pre-collision system sensitivity level setting 3 levels
        DRCC

        Display Description Setting ECU
        "Curve Speed Reduction" Curve speed reduction level setting 2 levels/OFF Forward recognition camera
        BSM

        Display Description Setting ECU
        - Blind spot monitor system setting ON/OFF Blind spot monitor sensor LH (B)
        "Brightness" Outer rear view mirror indicator brightness level setting 2 levels
        "Sensitivity" Blind spot monitor system sensitivity level setting 4 levels
        INTUITIVE PARKING ASSIST

        Display Description Setting ECU
        - Intuitive parking assist system setting ON/OFF Clearance warning ECU assembly
        "Volume" Clearance warning buzzer volume level setting 3 levels
        RCTA

        Display Description Setting ECU
        - Rear crossing traffic alert function setting ON/OFF Blind spot monitor sensor LH (B)
        "Volume" Rear crossing traffic alert buzzer (blind spot monitor buzzer) volume setting 3 levels
        PKSB

        Display Description Setting ECU
        - Parking support brake system setting ON/OFF Clearance warning ECU assembly
        "HUD MAIN"

        Display Description Setting ECU
        - Headup display system setting ON/OFF Meter mirror sub-assembly
        "HUD Brightness/Position" Brightness and position setting for headup display -
        "HUD Driving Support" "Tachometer Settings" Display setting for headup display "Blank/Hybrid System/Eco Indicator/Tachometer"
        "Navigation" Display setting for headup display ON/OFF
        "Driving Assist" Display setting for headup display ON/OFF
        "Compass" Display setting for headup display ON/OFF
        "Audio" Display setting for headup display ON/OFF
        "HUD Rotation" Headup display image calibration (rotation calibration) -
        RSA

        Display Description Setting ECU
        - Road sign assist system setting ON/OFF Forward recognition camera
        "Notification Method" "Above Speed Limit" Excess speed notification method setting "No Notification/Only Visual/Visual & Audio"
        "Others" Others traffic sign notification method setting "No Notification/Only Visual/Visual & Audio"
        "Notification Level" Excess speed notification level setting -5 to 10
        "VEHICLE SETTINGS"

        Display Description Setting ECU
        PBD "System Settings" Power back door system setting ON/OFF Multiplex network door ECU
        "Kick Sensor" Hands free power back door function setting ON/OFF
        "Opening Adjustment" Back door opening stop position setting when operated by power back door system 5 levels
        "Volume" Power back door buzzer volume level setting 3 levels
        Stop and Start Engine stop time setting for stop and start system when automatic air conditioning system is operating "Extended/Standard" Engine stop and start ECU
        "TPWS" Tire inflation pressure display function setting "Set Pressure/Change Wheel" Tire pressure warning ECU and receiver
        "Rear Seat Reminder" Rear seat reminder function setting ON/OFF Main body ECU (Multiplex network body ECU)
        "Scheduled Maintenance" Scheduled maintenance required reminder data reset Yes/No Combination meter assembly
        "Oil Maintenance" Engine oil maintenance required reminder data reset Yes/No ECM
        "SETTINGS" (FOR 4.2 INCH DISPLAY TYPE)

        Display Description Setting ECU
        "Language" Display language setting * Related ECUs
        "Units" Display units setting *
        Eco driving indicator light Eco driving indicator light display setting ON/OFF Combination meter assembly
        EV driving indicator light EV driving indicator light display setting ON/OFF
        Eco-friendly driving information tab "Hybrid System" "Eco Guidance" Eco acceleration guidance display setting ON/OFF
        "Fuel Economy" Displayed fuel economy display item setting "Trip Average/Total Average/Tank Average"
        Audio tab Audio tab display setting ON/OFF
        Vehicle information tab "Display Contents" "Energy Monitor" Energy monitor display setting ON/OFF
        "AWD" AWD system monitor display setting ON/OFF
        "Drive Info. Type" Displayed drive information display item setting "Trip/Total"
        "Drive Info. Items" Displayed drive information display item setting "Average Speed/Distance/Total Time"
        "Trip Summary" Current trip result display setting "Drive Info/Eco Score"
        "Pop-Up Display" "TbT Navigation" Interrupt display setting for navigation system-linked ON/OFF Combination meter assembly
        "Telephone" Interrupt display setting for phone-linked ON/OFF
        "Audio Operation" Interrupt display setting for audio system-linked ON/OFF
        "Volume Operation" Interrupt display setting for volume operation ON/OFF
        "Voice Control" Interrupt display setting for voice recognition ON/OFF
        Stop and Start Duration Interrupt display setting for stop and start system information ON/OFF
        Stop and Start Status Interrupt display setting for stop and start system information ON/OFF
        "Brightness" Interrupt display setting for illumination level ON/OFF
        "MID OFF" Multi-information display off setting -
        "Default Settings" Reset the combination meter settings to the default setting - Related ECUs
        1. *: Varies according to the vehicle specification.
        "SETTINGS" (FOR 7 INCH DISPLAY TYPE)

        Display Description Setting ECU
        "Language" Display language setting * Related ECUs
        "Units" Display units setting *
        Eco driving indicator light Eco driving indicator light display setting ON/OFF Combination meter assembly
        EV driving indicator light EV driving indicator light display setting ON/OFF
        "Digital Speed" Digital speedometer display setting ON/OFF
        "Select Gadget" Displayed drive information display item setting "No Display/Average Speed/Distance/Total Time"
        "Fuel Economy Type" Displayed drive information display item setting "Trip/Total/Tank"
        "Pop-Up Display" "Pop-Up Display" Interrupt display setting for navigation system-linked ON/OFF Combination meter assembly
        "Telephone" Interrupt display setting for phone-linked ON/OFF
        "Audio Operation" Interrupt display setting for audio system-linked ON/OFF
        "Volume Operation" Interrupt display setting for volume operation ON/OFF
        "Voice Control" Interrupt display setting for voice recognition ON/OFF
        Stop and Start Duration Interrupt display setting for stop and start system information ON/OFF
        Stop and Start Status Interrupt display setting for stop and start system information ON/OFF
        "Brightness" Interrupt display setting for illumination level ON/OFF
        "MID OFF" Multi-information display off setting -
        "Default Settings" Reset the combination meter settings to the default setting - Related ECUs
        1. *: Varies according to the vehicle specification.
Diesel-Data.com