DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - Service Information (3 Of 3) >> SEAT HEATER CONTROL (for Front Side) >> Removal [10/2022 - 11/2023] >> Procedure

Removal [10/2022 - 11/2023]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

  2. REMOVE FRONT SEAT ASSEMBLY 

    for Manual Seat: Refer to REMOVAL [10/2022 - 11/2023]

    for Power Seat: Refer to REMOVAL [10/2022 - 11/2023]

  3. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY 
    1. Disconnect the connector.
      GTY927622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Remove in this Direction
    2. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the seat heater control sub-assembly as shown in the illustration.
Diesel-Data.com