Removal [10/2022 - 11/2023]: Procedure
- PRECAUTION NOTE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
- REMOVE FRONT SEAT ASSEMBLY
Refer to REMOVAL [10/2022 - 11/2023]
- DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Refer to PROCEDURE - Step 6
- REMOVE FRONT SEAT FRONT CUSHION SHIELD
Refer to PROCEDURE - Step 7
- REMOVE FRONT SEAT CUSHION SHIELD
Refer to PROCEDURE - Step 8
- REMOVE FRONT SEAT INNER CUSHION SHIELD
Refer to PROCEDURE - Step 9
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Refer to PROCEDURE - Step 14
- REMOVE FRONT SEAT HEADREST SUPPORT ASSEMBLY
Refer to PROCEDURE - Step 15
- REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Refer to PROCEDURE - Step 16
- REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)
Refer to PROCEDURE - Step 20
- REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY
- Disconnect the 2 connectors.
- Disengage the clamp.
- Disengage the 2 claws to remove the 2 front No. 2 seatback edge protectors from the front seatback frame sub-assembly.
- Remove the lumbar support adjuster assembly from the front seatback frame sub-assembly as shown in the illustration.
Remove in this Direction - Remove the seatback felt from the lumbar support adjuster assembly.
- Disconnect the 2 connectors.
- REMOVE FRONT NO. 2 SEATBACK EDGE PROTECTOR
Refer to PROCEDURE - Step 25
