Inspection [12/2019 - ]: Procedure
- INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Front Seat Cushion Heater Assembly LH)Standard Resistance
Tester Connection Condition Specified Condition A-1 - A-2 Seat heater temperature 20°C (68°F) 3.28 to 3.92 Ω e19-2 - A-2 Seat heater temperature 20°C (68°F) Below 1 Ω e19-4 - e19-5 Seat heater temperature 20°C (68°F) 11.94 to 12.24 kΩ e19-2 - e19-6 Seat heater temperature 20°C (68°F) Below 1 Ω e19-1 - e19-2 Seat heater temperature 20°C (68°F) 3.19 to 3.83 Ω If the result is not as specified, replace the front seat cushion heater assembly LH.
- Measure the resistance according to the value(s) in the table below.
- INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Front Seat Cushion Heater Assembly RH)Standard Resistance
Tester Connection Condition Specified Condition B-1 - B-2 Seat heater temperature 20°C (68°F) 3.28 to 3.92 Ω e8-2 - B-2 Seat heater temperature 20°C (68°F) Below 1 Ω e8-4 - e8-5 Seat heater temperature 20°C (68°F) 11.94 to 12.24 kΩ e8-2 - e8-6 Seat heater temperature 20°C (68°F) Below 1 Ω e8-1 - e8-2 Seat heater temperature 20°C (68°F) 3.19 to 3.83 Ω If the result is not as specified, replace the front seat cushion heater assembly RH.
- Measure the resistance according to the value(s) in the table below.
