Data List / Active Test [12/2019 - 11/2023]
- DATA LIST NOTE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note ACC SW Ignition switch ACC signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ACC"ON" is also displayed for this item when the ignition switch is ON. IG SW Ignition switch ON signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ON"OFF" is also displayed for this item when the ignition switch is ACC. RR Door Courtesy SW Rear door courtesy light switch assembly (for RH) signal OFF or ON OFF: Rear door RH closed
ON: Rear door RH open- RL Door Courtesy SW Rear door courtesy light switch assembly (for LH) signal OFF or ON OFF: Rear door LH closed
ON: Rear door LH open- Back Door Courtesy SW Back door courtesy light switch signal OFF or ON OFF: Back door closed
ON: Back door open- FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK LOCK: Front door RH locked
UNLOCK: Front door RH unlocked- FR Door Courtesy SW Front door courtesy light switch assembly (for RH) signal OFF or ON OFF: Front door RH closed
ON: Front door RH open- FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK LOCK: Front door LH locked
UNLOCK: Front door LH unlocked- FL Door Courtesy SW Front door courtesy light switch assembly (for LH) signal OFF or ON OFF: Front door LH closed
ON: Front door LH open- RR-Door Lock Pos SW Rear door RH unlock detection switch signal OFF or ON OFF: Rear door RH locked
ON: Rear door RH unlocked- RL-Door Lock Pos SW Rear door LH unlock detection switch signal OFF or ON OFF: Rear door LH locked
ON: Rear door LH unlocked- Interior Light Control Operation of the illuminated entry system OFF or ON Customized value is displayed - I/L ON W/Door Key Unlock Function that turns on the interior lights when the doors are unlocked OFF or ON Customized value is displayed - Lighting Time Lighting time of the delay control function (illuminated entry system) 15 s, 7.5 s or 30 s Customized value is displayed - Room Light when Aprchd Function that turns on the interior lights when a key enters any actuation area OFF or ON Customized value is displayed - I/L when ACC OFF Function that turns on the interior lights when the ignition switch is turned from ACC or ON to off OFF or ON Customized value is displayed - Light Control Function that dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P: - Center Tray Illumination Light (No. 1 Instrument Panel Light Sub-assembly)*
- Front Passenger Side Tray Illumination Light (No. 1 Instrument Panel Light Sub-assembly)*
- Door Ambient Light (Door Trim Board Sub-assembly)*
OFF or ON Customized value is displayed - Interior Illumination Light Function that turns on the following lights: - Center Tray Illumination Light (No. 1 Instrument Panel Light Sub-assembly)*
- Front Passenger Side Tray Illumination Light (No. 1 Instrument Panel Light Sub-assembly)*
- Door Ambient Light (Door Trim Board Sub-assembly)*
OFF or ON Customized value is displayed - - *: w/ Ambient Illumination Light
- Read the Data List according to the display on the GTS.
- ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Perform the Active Test according to the display on the GTS.
Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Illuminated Entry System Turns on the lights that are controlled by the illuminated entry system*1 OFF or ON Perform the Active Test with the door linked switch of the map light assembly on, switches of the spot light assembly LH and RH off and switch of the No. 1 room light assembly in the DOOR position. Relay for Interior Light Auto Cut Function DOME CUT relay OFF or ON When performing this Active Test, turn all the interior lights on. - OFF: DOME CUT relay on (interior lights turn on)
- ON: DOME CUT relay off (interior lights turn off)
Interior Illumination Light1 - Center Tray Illumination Light (No. 1 Instrument Panel Light Sub-assembly)*2
- Front Passenger Side Tray Illumination Light (No. 1 Instrument Panel Light Sub-assembly)*2
- Door Ambient Light (Door Trim Board Sub-assembly)*2
OFF or ON Preconditions for using the Active Test to check dimmer controlled illumination: - Ignition switch ON
- Shift lever is in any position other than P
- *1: Refer to System Description for the lights that are controlled by the illuminated entry system.
- *2: w/ Ambient Illumination Light
Body Electrical > Smart Key > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Power/Engine SW Light Push start switch illumination OFF or ON -
- Perform the Active Test according to the display on the GTS.