DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (1 Of 2) >> T24A-FTS Spark Plug >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

  1. INSTALL SPARK PLUG 
    NOTE:

    If a spark plug has been struck or dropped, replace it.

    Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

  2. INSTALL IGNITION COIL ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. CONNECT ENGINE WIRE 
  4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 56 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 56 [11/2023 - ]

  5. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

      Refer to INITIALIZATION [10/2022 - ]

Diesel-Data.com