DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (1 Of 2) >> 2GR-FKS Spark Plug >> Removal [12/2019 - 10/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.

NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
  • Replacement of ignition coil assembly
  • Replacement of spark plug
  • Replacement of throttle body with motor assembly
  • Cleaning the deposits from the throttle body with motor assembly
 Perform Inspection After Repair
  • Poor idle, etc.
  • Engine start function, etc.
 Refer to INITIALIZATION [12/2019 - 10/2022]
Diesel-Data.com