Data List / Active Test [12/2019 - 11/2023]
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- DATA LIST FOR AIRBAG SENSOR ASSEMBLY
- Read the Data List according to the display on the GTS.
Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Driver Seat Position Driver seat position Forward: Seat is positioned forward
Bkward: Seat is positioned rearward
Fail: Failure is detectedForward/Bkward - Passenger Classification Front passenger classification NG: Data is not determined
Child: Child is seated or vacant
AF05: Adult is seated
AM50: Adult is seated
Fail: Failure is detectedChild/AF05/AM50 - Right side Buckle SW Front seat belt buckle switch RH Unset: Seat belt is not fastened
Set: Seat belt is fastened
NG: Data is not determinedUnset/Set - Display Type Information Display type information LR: Display is indicated by LH/RH
DP: Display is indicated by Driver/PassengerLR - Number of Past DTC Number of past DTC Min.: 0, Max.: 255 0 -
- Read the Data List according to the display on the GTS.