DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Lane Control System - Diagnostics - Introduction >> Lane Control System >> Freeze Frame Data [12/2019 - 09/2020] >> Freeze Frame Data [12/2019 - 09/2020]

Freeze Frame Data [12/2019 - 09/2020]

  1. DESCRIPTION 
    1. Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state as Freeze Frame Data.
  2. CHECK FREEZE FRAME DATA 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Lane Control / Trouble Codes.

      Chassis > Lane Control > Trouble Codes 

    5. According to the display on the GTS, select a DTC to display its freeze frame data.

      Chassis > Lane Control 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Total Distance Traveled - - - Cannot be used
      Total Distance Traveled - Unit - - - Cannot be used
      LDA Control Lane control system control status Prohibit or Permit Prohibit: Control prohibited
      Permit: Control permitted      		 -
      Turn Switch (Right) Right turn signal switch status OFF or ON OFF: Right turn signal switch off
      ON: Right turn signal switch on      		 -
      Turn Switch (Left) Left turn signal switch status OFF or ON OFF: Left turn signal switch off
      ON: Left turn signal switch on      		 -
      Vehicle Information (2WD/4WD) - - - Cannot be used
      Vehicle Information (Conv/HV) - - - Cannot be used
Diesel-Data.com