Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All		1.8		B
Front or Rear,Both Sides		1.0		B
Combination Procedure: BRAKE HOSE: Replace:
Gas/Electric, Each Additional		0.2		B
Gas/Electric, One	Includes: Bleed Brakes. Includes: Additional time for use of scan tool to perform this procedure.	0.5		B
Combination Procedure: CALIPER: Overhaul:
Gas/Electric, One,Front	Includes: Bleed Brakes. Includes: Additional time for use of scan tool to perform this procedure.	0.9		B
Gas/Electric, One,Rear	Includes: Bleed Brakes. Includes: Additional time for use of scan tool to perform this procedure.	0.7		B
Combination Procedure: CALIPER: Replace:
Gas/Electric, One	Includes: Bleed Brakes. Includes: Additional time for use of scan tool to perform this procedure.	0.5		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,Each	Correct Rotor lateral runout by indexing.	0.2		B
Combination Procedure: ELECTRONIC PARKING BRAKE SYSTEM: Disable & Enable:
Brake Pad Replacement Mode	Includes: Disable and enable electronic brake system with use of scan tool or interactive vehicle controls.	0.2		B
Combination Procedure: HUB & ROTOR DISC: Clean & Inspect:
Corrosion,Each	Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.	0.2		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace: Includes: Clean, lube and/or replace Parking Brake Hardware (as necessary). DOES NOT include refinishing.
Each Side		0.4		B
Combination Procedure: WHEEL BEARING: Replace:
Gas/Electric,FWD, Front,One Side	DOES NOT include wheel alignment.	1.5		B
Gas/Electric,FWD, Rear,Hub Assembly,One Side		0.3		B