Caution / Notice / Hint

NOTE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to INITIALIZATION [12/2019 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2021] , or refer to INITIALIZATION [10/2021 - 10/2022] , or refer to INITIALIZATION [10/2022 - 11/2023]

2 identical squib connectors are connected to the front seat outer belt assembly RH. The front pretensioner squib RH connector is indicated by the arrow in the illustration.

HINT:

Perform the simulation method by selecting check mode (Signal Check) using the GTS.
Refer to CHECK MODE PROCEDURE [12/2019 - 11/2023]
After selecting check mode (Signal Check), perform the simulation method by wiggling each connector of the airbag system or driving the vehicle on a city road or rough road.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ]