DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System - Service Information (2 Of 2) >> Front Seat Side Airbag Assembly >> Installation [11/2023 - ] >> Procedure

Installation [11/2023 - ]: Procedure

  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY 
    1. Install the front seat airbag assembly with 2 new nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

      NOTE:
      • Do not reuse the nuts.
      • Make sure that the separate type front seatback spring assembly is not deformed. If it is deformed, replace it with a new one.
    2. Engage the clamp.
  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat) 

    Refer to PROCEDURE - Step 28

  3. INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY (for Power Seat) 

    Refer to PROCEDURE - Step 29

  4. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Power Seat) 

    Refer to PROCEDURE - Step 30

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 35

  6. INSTALL FRONT SEAT CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 36

  7. INSTALL FRONT SEAT FRONT CUSHION SHIELD (for Power Seat) 

    Refer to PROCEDURE - Step 37

  8. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat) 

    Refer to PROCEDURE - Step 38

  9. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) 

    Refer to INSTALLATION [11/2023 - ]

  10. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat) 

    Refer to PROCEDURE - Step 19

  11. INSTALL FRONT SEAT HEADREST SUPPORT ASSEMBLY (for Manual Seat) 

    Refer to PROCEDURE - Step 20

  12. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Manual Seat) 

    Refer to PROCEDURE - Step 21

  13. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat) 

    Refer to PROCEDURE - Step 22

  14. INSTALL FRONT SEAT CUSHION SHIELD (for Manual Seat) 

    Refer to PROCEDURE - Step 23

  15. INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat) 

    Refer to PROCEDURE - Step 24

  16. INSTALL RECLINING HINGE COVER (for Manual Seat) 

    Refer to PROCEDURE - Step 25

  17. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat) 

    Refer to PROCEDURE - Step 26

  18. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat) 

    Refer to INSTALLATION [11/2023 - ]

Diesel-Data.com