Removal [12/2019 - 10/2021]: Procedure
- REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)
HINT:
Use the same procedure as for the LH side.
Refer to REMOVAL [12/2019 - 10/2021]
- DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 6
- REMOVE FRONT SEAT FRONT CUSHION SHIELD RH (for Power Seat)
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 7
- REMOVE FRONT SEAT CUSHION SHIELD RH (for Power Seat)
Refer to PROCEDURE - Step 10
- REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Power Seat)
Refer to PROCEDURE - Step 11
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH (for Power Seat)
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 16
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH (for Power Seat)
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 29
- REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)
Refer to REMOVAL [12/2019 - 10/2022]
- DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)
Refer to PROCEDURE - Step 4
- REMOVE RECLINING HINGE COVER RH (for Manual Seat)
Refer to PROCEDURE - Step 5
- REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)
Refer to PROCEDURE - Step 6
- REMOVE FRONT SEAT CUSHION SHIELD RH (for Manual Seat)
Refer to PROCEDURE - Step 7
- REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Manual Seat)
Refer to PROCEDURE - Step 8
- REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH (for Manual Seat)
Refer to PROCEDURE - Step 9
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH (for Manual Seat)
Refer to PROCEDURE - Step 18
- REMOVE FRONT SEAT CUSHION AIRBAG ASSEMBLY RH WARNING:
When storing the front seat cushion airbag assembly RH, keep the airbag deployment side facing upward.

Deployment Side - Disengage the 3 clamps.
- Remove the 2 nuts.NOTE:
- Do not reuse the nuts.
- Make sure that the separate type front seat cushion spring assembly is not deformed. If it is deformed, replace it with a new one.
- Pass the airbag wire harness through the hole to remove the front seat cushion airbag assembly RH.
- Disengage the 3 clamps.


