DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System - Service Information (2 Of 2) >> SRS Seat Cushion Airbag Assembly >> Installation [12/2019 - 10/2021] >> Procedure

Installation [12/2019 - 10/2021]: Procedure

  1. INSTALL FRONT SEAT CUSHION AIRBAG ASSEMBLY RH 
    1. Pass the airbag wire harness through the hole.
      GTY907548Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the front seat cushion airbag assembly RH with 2 new nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

      NOTE:
      • Do not reuse the nuts.
      • Make sure that the separate type front seat cushion spring assembly is not deformed. If it is deformed, replace it with a new one.
    3. Engage the 3 clamps.
  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH (for Power Seat) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 19

  3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH (for Power Seat) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 32

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Power Seat) 

    Refer to PROCEDURE - Step 39

  5. INSTALL FRONT SEAT CUSHION SHIELD RH (for Power Seat) 

    Refer to PROCEDURE - Step 40

  6. INSTALL FRONT SEAT FRONT CUSHION SHIELD RH (for Power Seat) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 41

  7. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 42

  8. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat) 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to INSTALLATION [12/2019 - 10/2022]

  9. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD RH (for Manual Seat) 

    Refer to PROCEDURE - Step 12

  10. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH (for Manual Seat) 

    Refer to PROCEDURE - Step 21

  11. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Manual Seat) 

    Refer to PROCEDURE - Step 22

  12. INSTALL FRONT SEAT CUSHION SHIELD RH (for Manual Seat) 

    Refer to PROCEDURE - Step 23

  13. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat) 

    Refer to PROCEDURE - Step 24

  14. INSTALL RECLINING HINGE COVER RH (for Manual Seat) 

    Refer to PROCEDURE - Step 25

  15. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat) 

    Refer to PROCEDURE - Step 26

  16. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat) 

    Refer to INSTALLATION [12/2019 - 10/2022]

  17. PERFORM DIAGNOSTIC SYSTEM CHECK 

    Refer to DTC CHECK / CLEAR [12/2019 - 11/2023]

Diesel-Data.com