DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case System (GF2A) - Service Information >> TRANSFER CASE FRONT OIL SEAL (for RH Side) >> Replacement [12/2019 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transfer case oil seal RH removal/installation are shown below.

NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Replacement of automatic transaxle fluid ATF thermal degradation estimate reset The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly Refer to INITIALIZATION [12/2019 - 10/2022] , or refer to INITIALIZATION [10/2022 - ]
Front wheel alignment adjustment
  1. Perform "Reset Memory"
  2. Perform "Calibration".
  • VSC is disabled or malfunctions
  • DTCs are output
  • Slip indicator light illuminates
  • ABS warning light illuminates
 Refer to UTILITY [12/2019 - 11/2023] , or refer to UTILITY [11/2023 - ]
Diesel-Data.com