DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Caliper >> Remove, Install, and Overhaul

Mechanical - Hydraulic: Caliper: Remove, Install, and Overhaul

WARNING: This page is about the Highlander Hybrid LE, 2.5L Eng VIN A, which is a different variant/trim than selected.
Includes: Bleed Brake System and replace Pads (if necessary).

Applies ToNoteStandard HoursWarranty HoursSkill Level
Gas/Electric, Front,BothIncludes: Additional time for use of scan tool to perform this procedure.2.4B
Gas/Electric, Front,One SideIncludes: Additional time for use of scan tool to perform this procedure.1.4B
Gas/Electric, Rear,BothIncludes: Additional time for use of scan tool to perform this procedure.2.0B
Gas/Electric, Rear,One SideIncludes: Additional time for use of scan tool to perform this procedure.1.2B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,EachCorrect Rotor lateral runout by indexing.0.2B
Combination Procedure: ELECTRONIC PARKING BRAKE SYSTEM: Disable & Enable:
Brake Pad Replacement ModeIncludes: Disable and enable electronic brake system with use of scan tool or interactive vehicle controls.0.2B
Combination Procedure: HUB & ROTOR DISC: Clean & Inspect:
Corrosion,EachClean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor.0.2B