Installation [09/2020 - 10/2022]: Procedure

1. Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut.

   Torque: 4.0 N.m (41 kgf/cm, 35 in.lbf) 

2. Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system).
3. Engage the vacuum hose clamp.
4. Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector.

Refer to PROCEDURE - Step 51

• for Sport Package

  Refer to PROCEDURE - Step 4

• except Sport Package

  Refer to PROCEDURE - Step 4