DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information >> Rear Shock Absorber >> Disposal [12/2019 - ] >> Procedure

Disposal [12/2019 - ]: Procedure

  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY 
    1. Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.
      GTY907404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a hacksaw, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.
      WARNING:
      • Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.
      • Always wear safety glasses.
      GTY596062Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      The gas is colorless, odorless and non-poisonous.

Diesel-Data.com