DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Panoramic View Monitor System - Diagnostic Codes & Symptom Tests >> Panoramic View Monitor System >> DTC C1614-04: Circumference Monitoring Camera Control Module System Internal Failure [10/2022 - ] >> Procedure

DTC C1614-04: Circumference Monitoring Camera Control Module System Internal Failure [10/2022 - ]: Procedure

  1. CHECK CAMERA IMAGE AND CHECK FOR DTCs 
    1. Check the image of the cameras and check for DTCs, and proceed to the respective link below.

      Result

      Result Proceed to
      Front, rear, right side, or left side camera image is black, or either DTC C1622-87, C1681-87, C168E-87, C169D-87 is output A
      Front, rear, right side, or left side camera image is normal and DTC C1622-87, C1681-87, C168E-87 and C169D-87 are not all output B

    Result: 

    PROCEED TO THE RESPECTIVE PROCEDURE 

    Refer to Image from Camera for Panoramic View Monitor is Abnormal [10/2022 - ] 

    Result: 

    See step  2

  2. REPLACE PARKING ASSIST ECU 
    1. Replace the parking assist ECU with a new one.

      HINT: 

      Refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END