Installation [12/2019 - ]: Procedure

HINT: 

When installing the rear door outside moulding sub-assembly, heat the vehicle body using a heat light.

Standard Measurement

WARNING:

• Do not touch the heat light and heated parts, touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Clean the vehicle body surface.
   1. Using a heat light, heat the vehicle body surface.
   2. Remove any double-sided tape from the vehicle body.
   3. Wipe off any tape adhesive residue with cleaner.
2. Install 9 new clips to the rear door outside moulding sub-assembly.
3. Install the rear door outside moulding sub-assembly.
   1. Using a heat light, heat the vehicle body surface.
   2. Remove the release paper from the rear door outside moulding sub-assembly.

      HINT: 

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   3. Engage the 9 clips and attach the double-sided tape.

      HINT: 

      Press the rear door outside moulding sub-assembly firmly to install it.

   4. Install the nut.
   5. Install a new plug plate.
   6. Engage the 5 claws.
   7. Install the rear door outside moulding sub-assembly with the clip.
4. Remove the protective tape.

HINT: 

When installing the rear door lower outside moulding sub-assembly, heat the vehicle body using a heat light.

Standard Measurement

WARNING:

• Do not touch the heat light and heated parts, touching the heat light may result in burns.
• Touching heated parts for a long time may result in burns.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

1. Clean the vehicle body surface.
   1. Using a heat light, heat the vehicle body surface.
   2. Remove any double-sided tape from the vehicle body.
   3. Wipe off any tape adhesive residue with cleaner.
2. Install a new rear door lower outside moulding sub-assembly.
   1. Using a heat light, heat the vehicle body surface.
   2. Remove the release paper from the rear door lower outside moulding sub-assembly.

      HINT: 

      After removing the release paper, keep the exposed adhesive free from foreign matter.

   3. Engage the 4 clips and attach the double-sided tape.

      HINT: 

      Press the rear door lower outside moulding sub-assembly firmly to install it.

   4. Install the rear door lower outside moulding sub-assembly with the screw and 2 clips.
3. Remove the protective tape.