DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim - Service Information (2 Of 2) >> Black Out Tape >> Removal [12/2019 - 09/2020] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during black out tape removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
  • Forward recognition camera
  • Windshield glass*
 Adjust forward recognition camera
  • Dynamic Radar Cruise Control System (for HV model)
  • Front Camera System
  • Lane Control System
  • Road Sign Assist System
  • Pre-collision System
  • Lighting System (EXT)
 One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [12/2019 - 09/2020]
or
Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [12/2019 - 09/2020]

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

NOTE:

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, front camera system, lane control system, road sign assist system, pre-collision system, lighting system (EXT) may not operate properly due to a difference in the transmissivity or black ceramic border.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
  • Forward recognition camera
  • Windshield glass*
 Adjust forward recognition camera
  • Dynamic Radar Cruise Control System (for Gasoline model)
  • Front Camera System
  • Lane Control System
  • Road Sign Assist System
  • Pre-collision System
  • Lighting System (EXT)
 One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [12/2019 - 09/2020]
or
Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [12/2019 - 09/2020]

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

NOTE:

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, front camera system, lane control system, road sign assist system, pre-collision system, lighting system (EXT) may not operate properly due to a difference in the transmissivity or black ceramic border.

HINT: 

Diesel-Data.com