On-Vehicle Inspection [12/2019 - ]: Procedure

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for LH Side:

1. Operate the windshield wiper motor assembly.
2. Stop the windshield wiper motor assembly operation.
3. Check the automatic stop (park) position.

   HINT: 

   After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

   Standard Clearance

   Area	Measurement
   A	10 mm (0.394 in.)

   OK

   The front wiper stops at the position shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for RH Side:

1. Operate the windshield wiper motor assembly.
2. Stop the windshield wiper motor assembly operation.
3. Check the automatic stop (park) position.

   HINT: 

   After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

   Standard Clearance

   Area	Measurement
   A	10 mm (0.394 in.)

   OK

   The front wiper stops at the position shown in the illustration.