DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information >> Front Wiper Motor >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY 
    1. Apply battery voltage to the windshield wiper motor assembly and check the LO operation.
      GTY937859Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Windshield Wiper Motor Assembly)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 5 (+1)
      Auxiliary battery negative (-) → Terminal 4 (E)      		 Motor operates at low speed (LO)
    2. Apply battery voltage to the windshield wiper motor assembly and check the HI operation.

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 3 (+2)
      Auxiliary battery negative (-) → Terminal 4 (E)      		 Motor operates at high speed (HI)

      If the result is not as specified, replace the windshield wiper motor assembly.

Diesel-Data.com