DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information >> Rear Wiper Motor >> On-Vehicle Inspection [12/2019 - ] >> Procedure

On-Vehicle Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR WIPER MOTOR ASSEMBLY 
    1. Operate the rear wiper motor assembly.
      GTY870145Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Alignment Mark
    2. Stop the rear wiper motor assembly operation.
    3. Check the automatic stop position.

      HINT: 

      After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

      Standard Clearance

      Area Measurement
      A 10.0 mm (0.394 in.)

      OK

      The rear wiper stops at the position shown in the illustration.

Diesel-Data.com