DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information >> Rear Wiper Motor >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT REAR WIPER MOTOR ASSEMBLY 
    1. Apply auxiliary battery voltage to the rear wiper motor assembly and check the wiper operation.

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 4 (+B)
      Auxiliary battery negative (-) → Terminal 3 (LS)
      Auxiliary battery negative (-) → Terminal 5 (E)      		 Motor operates

      If the result is not as specified, replace the rear wiper motor assembly.

      GTY871335Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Wiper Motor Assembly)
Diesel-Data.com