DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Service Information >> WASHER NOZZLE (for Rear Television Camera) >> Removal [11/2023 - ] >> Procedure

Removal [11/2023 - ]: Procedure

  1. REMOVE BACK DOOR SERVICE HOLE COVER LH 

    Refer to PROCEDURE - Step 5

  2. REMOVE BACK DOOR SERVICE HOLE COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 7

  4. REMOVE TELEVISION CAMERA ASSEMBLY WITH NOZZLE 

    w/o Digital Inner Mirror: Refer to PROCEDURE - Step 4

    w/ Digital Inner Mirror: Refer to PROCEDURE - Step 5

  5. REMOVE CAMERA CLEANER NOZZLE ASSEMBLY (w/ Digital Inner Mirror) 
    1. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the camera cleaner nozzle assembly as shown in the illustration.
      GTY939965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Remove in this Direction
  6. REMOVE CAMERA CLEANER NOZZLE ASSEMBLY 
    1. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the camera cleaner nozzle assembly as shown in the illustration.
      GTY884074Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Remove in this Direction
Diesel-Data.com