DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Panoramic View Monitor System - Diagnostic Codes & Symptom Tests >> Panoramic View Monitor System >> DTC C1625: Open or Short in Steering Angle Sensor +B [12/2019 - 10/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Since the panoramic view monitor system has functions that use the CAN communication system, first check that there is no malfunction in the communication system by inspecting the CAN communication functions in accordance with the "How to Proceed with Troubleshooting" procedures. Then, conduct the following inspection procedure.
  • When "!" is displayed on the multi-display assembly after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

    Refer to INITIALIZATION [12/2019 - 10/2022]

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Refer to CALIBRATION [12/2019 - 10/2022]

  • Inspect the fuses for circuits related to this system before performing the following procedure.
Diesel-Data.com