DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) >> Back Door >> Disassembly [12/2019 - 10/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back door removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
Rear television camera assembly*
  • Parking assist monitor system initialization
  • Rear television camera assembly optical axis (Back camera position setting)
 Parking Assist Monitor System Refer to CALIBRATION [12/2019 - 10/2022]
Rear television camera view adjustment Panoramic View Monitor System Refer to CALIBRATION [12/2019 - 10/2022]
Replacement or removal and installation of 2 or more parts: 
  • Front television camera assembly, radiator grille sub-assembly or front bumper assembly
  • Rear television camera assembly
  • Side television camera assembly LH or outer rear view mirror assembly LH
  • Side television camera assembly RH or outer rear view mirror assembly RH
 Television camera view adjustment Panoramic View Monitor System Refer to CALIBRATION [12/2019 - 10/2022]
Multiplex network door ECU* Reset back door close position Power Back Door System Refer to INITIALIZATION [12/2019 - 11/2023]

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
Rear television camera assembly*
  • Parking assist monitor system initialization
  • Television camera assembly optical axis (Back camera position setting)
 Parking Assist Monitor System Refer to CALIBRATION [12/2019 - 10/2022]
Rear television camera view adjustment Panoramic View Monitor System Refer to CALIBRATION [12/2019 - 10/2022]
Replacement or removal and installation of 2 or more parts: 
  • Front television camera assembly, radiator grille sub-assembly or front bumper assembly
  • Rear television camera assembly
  • Side television camera assembly LH or outer rear view mirror assembly LH
  • Side television camera assembly RH or outer rear view mirror assembly RH
 Television camera view adjustment Panoramic View Monitor System Refer to CALIBRATION [12/2019 - 10/2022]
Multiplex network door ECU* Reset back door close position Power Back Door System Refer to INITIALIZATION [12/2019 - 11/2023]

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

Diesel-Data.com