DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) >> Back Door Opener Switch >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY 
    1. Check the operation of the opener switch.
      1. Measure the resistance according to the value(s) in the table below.
        GTY893139Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Back Door Opener Switch Assembly)

        Standard Resistance

        Tester Connection Condition Specified Condition
        2 - 3 Back door opener switch not pushed 10 kΩ or higher
        2 - 3 Back door opener switch pushed Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

    2. Check the operation of the lock switch.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 Back door lock switch not pushed 10 kΩ or higher
        1 - 2 Back door lock switch pushed Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

Diesel-Data.com