DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door / Hatch - Service Information (2 Of 2) >> Power Back Door Control Switch >> Inspection [12/2019 - ] >> Procedure

Inspection [12/2019 - ]: Procedure

  1. INSPECT POWER BACK DOOR CONTROL SWITCH 
    1. Check the switch.
      GTY933385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Power Back Door Control Switch)
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        5 - 2 Pushed (ON) Below 1 Ω
        5 - 2 Not Pushed (OFF) 10 kΩ or higher

        If the result is not as specified, replace the power back door control switch.

    2. Check the switch illumination.
      1. Apply auxiliary battery voltage to the switch connector and check that the power back door control switch illuminates.

        OK

        Auxiliary Battery Condition Specified Condition
        Auxiliary battery positive (+) → Terminal 6
        Auxiliary battery negative (-) → Terminal 1        		 Illumination illuminates

        If the result is not as specified, replace the power back door control switch.

Diesel-Data.com