Inspection [12/2019 - 11/2024]: Procedure
- INSPECT NAVIGATION ANTENNA ASSEMBLY (w/o Manual (SOS) Switch)
- Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections.
*a Component without harness connected
(Navigation Antenna Assembly)*b Voltage Applied between Terminals Current consumption check:
- Measure the current consumption according to the value(s) in the table below.
Standard Current
Tester Connection Condition Specified Condition 3 (core) - 3a (shield) 4.2 to 5 V applied between terminals 3 and 3a 10 to 30 mA NOTE:Do not apply 6 V or more between terminals 3 and 3a.
HINT:
If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.
- Measure the current consumption according to the value(s) in the table below.
- INSPECT NAVIGATION ANTENNA ASSEMBLY (w/ Manual (SOS) Switch)
- Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections.
*a Component without harness connected
(Navigation Antenna Assembly)*b Voltage Applied between Terminals Current consumption check: (GPS)
- Measure the current consumption according to the value(s) in the table below.
Standard Current
Tester Connection Condition Specified Condition 3 (core) - 3a (shield) 4.2 to 5 V applied between terminals 3 and 3a 10 to 30 mA NOTE:Do not apply 6 V or more between terminals 3 and 3a.
HINT:
If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.
- Measure the current consumption according to the value(s) in the table below.
- Resistance check: (Telephone Sub)
*a Component without harness connected
(Navigation Antenna Assembly)
