Remove & Install or Remove & Replace
WARNING: This page is about the Highlander Hybrid LE, 2.5L Eng VIN A, which is a different variant/trim than selected.
DOES NOT include alignment.
NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Gas/Electric, Front Axle,Both | 4.5 | 2.1 | B | |
| Gas/Electric, Front Axle,Left Side | 2.3 | 1.8 | B | |
| Gas/Electric, Front Axle,Right Side | 2.4 | 1.8 | B | |
| Combination Procedure: AXLE SHAFT BOOT: Remove & Replace: | ||||
| Inner &/or Outer,Each Side | 1.0 | B | ||
| Combination Procedure: AXLE SHAFT CENTER SUPPORT BEARING: Remove & Replace: | ||||
| 0.7 | B | |||
| Combination Procedure: CONSTANT VELOCITY JOINT: Remove & Replace: | ||||
| Each | 0.5 | B | ||
| Combination Procedure: TRANSAXLE OUTPUT SEAL: Remove & Replace: | ||||
| Gas/Electric, Each | 0.2 | B | ||