DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Panoramic View Monitor System - Diagnostics - Introduction (2 Of 2) >> Panoramic View Monitor System >> DTC Check / Clear [12/2019 - 10/2022] >> DTC Check / Clear [12/2019 - 10/2022]

DTC Check / Clear [12/2019 - 10/2022]

  1. CHECK DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.

      Chassis > Circumference Monitoring Camera Control Module > Trouble Codes 

    5. Check the details of the DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 10/2022] 

  2. CLEAR DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes.

      Chassis > Circumference Monitoring Camera Control Module > Clear DTCs 

    5. According to the display on the GTS, select the trouble code data display with the clear button.
Diesel-Data.com