DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Fuel System (A25A-FXS) - Service Information (2 Of 2)) >> Fuel Sender Gauge Assembly >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Engage the 2 claws to install the fuel sender gauge assembly to the fuel gauge bracket.
    2. Engage the 2 claws to install the fuel gauge bracket with fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.
      NOTE:

      Be careful not to bend the arm of the fuel sender gauge assembly.

    3. Engage the 2 clamps to connect the wire harness to the fuel suction tube with pump and gauge assembly.
      NOTE:
      • Do not damage the wire harness.
      • When engaging each wire harness to the clamp, engage one wire at a time.
    4. Connect the fuel sender gauge assembly connector.
  2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022] , or refer to INSTALLATION [10/2022 - 11/2023] , or refer to INSTALLATION [11/2023 - ] 

Diesel-Data.com