DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Emission Control System (A25A-FXS) - Service Information) >> Vacuum Sensor >> Installation [12/2019 - ] >> Procedure

Installation [12/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR) 
    1. Using an 8 mm socket wrench, install the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) to the intake manifold with the bolt.

      Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf) 

    2. Connect the vacuum hose to the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor).
    3. Connect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.
Diesel-Data.com